NPR Cat 6 UTP is a standardized twisted 4-pair copper cable and has been designed to provide exceptional transmission performance, low signal losses and enables delivering high speed data transmission systems. These cables are made of 23AWG, Solid Copper with 0.57mm thickness to ensure levels exceeding TIA 568-C.2 performance. The cables provide performance of 250+ MHz and are suitable for 10BASE-T / 100BASE-TX and 1000BASE-T / 1000BASE-TX (Gigabit Ethernet). The integral separator ensures permanent stability of the cables physical structure for enhanced long term performance and reduced crushing risk at cable anchorage points. The outer sheath has length marking that makes it easy and convenient for the installer. The Rip Cord between the sheath and twisted pairs allows easier stripping. Our cables are factory tested for performance, to ensure it matches or exceeds the specification of CAT 6 cable as in ANSI/TIA/EIA specifications. Our Strict quality control measure ensures that Cable can pass fluke test certification.
Features
Construction, Mechanical & Environmental Characteristics |
|
Twisted Pair |
8C ( 4 Pair) |
Conductor |
Solid Bare Copper |
AWG |
23 |
Construction |
0.57 (±0.02mm) |
Insulation |
PE/HDPE |
Nom. Thickness |
0.2 (mm) |
Insulation Dia. |
1 (±0.08mm) |
Seperator |
PE Cross |
Jacket |
PVC/LSZH |
Nom. Thickness |
0.5 (mm) |
Outer Dia. (D) |
6.3 (±0.30mm) |
Minimum bend radius |
≥ 8D (Installation) |
Maximum Pulling Force |
110 N |
Temperature |
0°C to +50°C (Installation) |
Electrical Characteristics @ 20°C |
|
Impedance |
100 ± 15 Ohms |
Current Rating |
1.5 A Max |
Delay Skew |
≤ 45 |
NVP |
68% |
Conductor DC Resistance |
≤ 9.38 / 100M |
Mutual Capacitance |
≤ 5.6 nF/100M Nominal |
Dielectric Strength |
1 kV RMS |
Variants
Click here to download the datasheet
|